TWO (2) BESSER MODEL FS-30, 3,000 CU. FT., FOUR COMPARTMENT FRAC-SANDERS:

1. 8'-0" wide x 54'-6" (king pin to rear of trailer)
2. Nine (9) hydraulic operated slide gates.
3. 24" wide conveyor belt with 2-1/2" high side walls rated at 450 FPM = 22,500 # / per minute.
4. 18" diameter lagged head pulley with B30 Hydroll hydraulic motor.
5. 4" diameter Schedule 80 fill pipes with K40A couplings each side in each compartment (removable fill pipes).
6. 3/16" plate construction of bin with 1/4" plate hopper section.
7. Bearing pads with machine screw jacks and 50 ton hydraulic screw jacks.
8. Hydraulic winch for lowering and raising of conveyor head section with "full up" pressure cutoff (lower controls only).
9. Gate open/close indicator panel (upper and lower controls).
10. Towing eyes at each corner, checker plate fenders with mud flaps.
11. Hydraulic pumps: 10GPM and 34GPM.
12. 100 gallon oil reservoir.
13. Gauges and valves for complete hydraulic systems.
14. 40 gallon fuel tank w/fuel level indicator.
15. Fifth wheel suspension assembly.
16. Tandem axles (ABS specs), air brake kit with clearance lights.
17. Ten (10) hole bud wheels with 11:00R x 22.5 twelve ply tires.
18. Two (2) hydraulic powered landing legs.
19. Upper and lower roof mounted hydraulic controls.
20. Upper control valves for operating gates and conveyor drive.
21. Lower control valves for operating gates, conveyor drive, & leveling jacks.
22. Operating discharge chute.
23. Roof mounted diamond plank walkway (per OSHA requirements) with roof mounted guardrails (hinged).
24. High pressure coupler auxiliary hook-up
25. Low pressure nipple auxiliary hook-up
26. Auxiliary hydraulic power disconnects 1 ¼” typed disconnects rear of unit on both sides.
27. POWER UNIT – 3054 CT Catepillar Diesel Engine MAKE OFFER